Comprehensive utilization of brewer's yeast

 Under the strict restriction of the “Environmental Protection Law”, the development and utilization of beer waste has become a hot spot in society. Usually, the by-products produced in the beer brewing process include beer waste, waste yeast, diatomite sludge, and a small amount of waste protein precipitates, Waste CO2 gas, etc., if not used, will cause huge waste of resources and environmental pollution. Because yeast will deteriorate in a few hours, it should be dehydrated and dried before use.

 The research has found that dry yeast has been successfully used in the field of medicine, and has broad development prospects in the bio-pharmaceutical industry. The brewer's yeast dryer made by Dingli can be used as a feed additive and food industry in addition to the pharmaceutical industry. The dried brewer's yeast can not only produce high-tech products, but also prevent pollution of the three wastes, and has become the main direction for studying the waste of beer waste at home and abroad.

  The recycling of beer waste is of great significance to promote the healthy development of the beer industry, reduce environmental pollution, increase social benefits and economic benefits. With the increase in market demand and the application of new biotechnology, the application of beer waste will have a better market prospect.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

How does soybean dregs dryer achieve energy saving and consumption reduction?

  When it comes to energy saving and consumption reduction of drying equipment, some people may say that it is to reduce various heat losses in the drying process, reduce the evaporation load of the equipment, and increase the inlet temperature of the equipment. In fact, the energy saving of the drying equipment is far more than the above. The method, taking the bean dreg dryer as an example, Dingli summed up some practical techniques.

 Over the years, Dingli has continuously explored the field of high-humidity material processing and utilization, and introduced the dual dehydration technology of mechanical dehydration and thermal drying. The high-strength mechanical dewatering machine quickly removes some of the free water and realizes deep precipitation through hot air drying technology, not only the operating cost is further reduced, but also the efficiency of the dryer is doubled.

  The bean dregs can be stored for a long time after being sterilized by the dryer and dried and dehydrated. It can also be processed into a feed with high nutritional value. Whether it is raising livestock or used for other purposes, the dryer is indispensable. Welcome customers to visit the equipment in Dingli.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

The main evaluation factor of coal slime drying equipment project is the core competitiveness of Dingli

  At the time of purchase, the customer first considers the quality of the slime drying equipment, then the price, followed by the dryer manufacturer's credit, after-sales service quality, etc. But these are the core competitiveness of Zhengzhou Dingli manufacturers.

  Coal slime drying equipment quality

  The quality of guarantee is not only the standard of material and configuration, but also the processing technology. Only the fine processing technology can make the performance of all aspects more effective, and the hardware cycle of the drying equipment can be guaranteed. Zhengzhou Dingli not only requires safe and efficient production, but also strictly controls the quality of processing. The slime dryer that passes through the three quality inspection procedures can be shipped and shipped.

  Coal slime drying equipment price

  The price is not the core competitiveness, but the quotation of the dryer must be based on the value, the principle of mutual benefit and mutual benefit, and the equipment cost-effectiveness. Therefore, the price positioning of Dingli slime dryer will not be low-attractive, and the brand will be promoted by high. Affordable but not cheap.

  Coal slime drying equipment manufacturer credit

  What is credit, Zhengzhou Dingli takes self-certification as a case of each real high-quality slime drying equipment project, from coal slurry drying technology, equipment quality, service quality, please consult for details.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Customers from Russia visited our company for peat drying and briquetting equipment

 From September 24th to 27th, a group of customers from Sakhalin visited our company. The customer visited our complete factory, inspected the drying unit in operation, and discussed technical issues with our engineers. Our work facilities have left a good impression on our customers. Now we are discussing the contract.

 The peat dryer is mainly composed of a cylinder body, a material discharging plate, a transmission device, an electric control device, an air guiding device, a dust removing device, a feeding device, a discharging device, a cleaning device, an exhaust pipe and the like. The peat dryer has a remarkable effect on dehydration and drying of peat. It is a widely used drying equipment, which is not only affordable, easy to operate, energy-saving and environmentally friendly, but also has a large processing capacity, which can create higher profits for users.

  Nowadays, Dingli has won the recognition and trust of more and more users with its strong enterprise strength and brand influence, efficient and durable drying equipment, and perfect after-sales service. If you have any needs, please feel free to contact us online or leave a message.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Brewer grain dehydrator work video

 The beer waste dewatering machine is also called beer waste slag extruder, wine press, the main equipment for increasing the solid content of liquid distiller's grains. The model is complete and has application in all major wineries. However, how much is the distiller's slag squeeze dewatering machine? What is the daily processing capacity? Next, we will introduce you in detail.

  White wine dehydration machine video - Nigeria customer site, speak with facts.

How much does the distiller's slag extruder dehydrate?

  How much does it cost to invest in a distiller's slag extruder? The price in the market ranges from tens of thousands to 200,000, and there are also specific choices for everyone. Because there are many manufacturers of slag extruders, they have their own methods in equipment selection, function, quality, etc. Some enterprises that mark the manufacturer are only an agent, there will be a price difference in the middle. Therefore, the price of the wine dewatering machine of different manufacturers is different.

  The distiller's slag extrusion dewatering machine manufacturers provide this month's preferential offer online

  For the specific price of the distiller's squeezing and dewatering machine, you can directly click on the free inquiry or message, and the sales manager of the responsible equipment will provide the monthly quotation online. At the same time, Zhengzhou Dingli manufacturer specializes in producing all kinds of high-humidity material dehydration equipment, which has rich production experience. And management experience, quality assurance, free test machine, and are direct sales, not pure in the intermediate link costs, so the price is more favorable! Please feel free to visit and purchase at the factory.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Recommend Zhengzhou Dingli Domestic Waste Dewatering Machine

  The domestic garbage dewatering machine is a common equipment for solid-liquid separation of domestic garbage. The gravity decompression action is used to complete the dewatering operation of domestic garbage. The quality of the equipment is related to the dewatering effect and production of domestic garbage, and is also closely related to the cost and benefit of the user. As people's awareness of environmental protection has increased, the demand for domestic garbage dewatering machines has also increased steadily, and the brands of domestic garbage dewatering machines have become more and more. So, which is better than the domestic garbage dewatering machine?

Which is better for the garbage dumper?

  For you to recommend professional domestic garbage dewatering machine manufacturers - Zhengzhou Dingli, the recommended reasons are as follows:

1. Big manufacturers, more reliable
  Zhengzhou Dingli focuses on high-humidity solid waste dewatering and drying for more than ten years. It is a large-scale joint-stock enterprise integrating scientific research, production and sales. With years of development, the “Dingli” brand has been deeply rooted in the hearts of the dehydrator industry. 

2. Good quality, excellent service
  Dingli has set up a research and development department for dehydration and drying equipment to ensure the advanced nature of the equipment. In addition, each equipment is made of high-quality raw materials and rigorous production process management, so that the Dingli Domestic Waste Dewatering Machine has won the trust of users with excellent quality. In addition, good service is also the basis for Dingli to be able to gain a foothold. Zhou Zhu highway engineers provide on-site guidance for each customer, free training, until the customer can operate independently, and in the event of a malfunction in the later equipment, the after-sales team is always on standby.

3. Excellent price, no loss

  Today, Zhengzhou Dingli has established itself in the dry machinery industry. Due to the good sales of equipment and the large demand for raw materials, the supplier has lower prices, plus the mode of self-production and sales, there is no intermediate circulation, so Zhengzhou On the basis of ensuring the quality of equipment, Dingli mainly focuses on the “close to the people” route. You can compare it in the market at any time. Under the same quality, the price of the domestic garbage dewatering machine will definitely satisfy you.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com


my Whatsapp:15670626070

The price of beer waste dryer is not expensive, is there any manufacturer recommended?

Brewer's grain spent dryer can quickly dry the wet distiller's grains water, once dry, it is really a cost-effective choice, equipment output, high drying efficiency, energy saving and environmental protection effect, can reduce costs by about 40%, low energy consumption, investment Less, there are applications in major wineries.

The price of beer waste dryer is not expensive?

There are many manufacturers of beer waste dryers on the market, and the models and types are not many. The prices of different manufacturers are not the same. The price is mainly related to the model and output of the configuration. The larger the model, the higher the production capacity, the higher the profit generated for the user and the higher the price. Investment and income are directly proportional. Therefore, when we choose beer dryer dryer, don't look expensive, it depends on the loss of buying. If you want to buy cost-effective equipment, it is the key to choose a good manufacturer.

Which manufacturer is good for beer brewer dryer?

Which manufacturer is good for beer brewer dryer? Many users recommend Zhengzhou Dingli, professional research and development production of beer waste dryer equipment for many years, high market share, equipment output, good quality, high performance, in addition, factory direct sales, fair prices, super cost-effective, let you Buy no loss. For detailed configuration and accurate quotation, please click on the online consultation, professionals will quickly customize the program for you.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

How much dry material can be dried out by one ton of potato residue? How much does the potato residue cost?

Potato residue, also known as potato residue, is the residue of potato starch processing. With the development of potato residue utilization, the market demand for potato residue is increasing. How many dry materials can be dried by a few users who have just entered the line? As well as the cost of drying potato slag, this article will explain this issue for everyone.

How much drying raw material can be dried out by one ton of potato dregs?

It is understood that one ton of potato slag can dry 0.23 tons of dry material, specifically how much dry material can be baked by one ton of wet potato slag, which is related to the moisture of potato slag, the dewatering and drying equipment used.

To dry the potato dregs into feed, it takes several steps: dehydration-drying-packing, etc., the dehydrated potato slag is transported to the potato residue dryer through the conveyor, and the potato dregs are under the inner board. Constantly copying and scattering, spiraling to achieve heat exchange, the material moves to the other end of the inner layer and enters the middle layer for countercurrent drying. The material is continuously pushed forward in the middle layer, and the material is moved in two steps. In the middle layer, both the heat dissipated by the inner roller and the heat of the middle roller are absorbed, and the drying time is prolonged, and the material reaches the expected dry state. The material goes to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop manner in the outer drum. The material that achieves the drying effect quickly travels out of the drum under the action of hot air. The wet material that does not reach the drying effect cannot be fast due to its own weight. As the material travels, the material is sufficiently dried in the rectangular copy board, thereby completing the drying purpose.

How much does the potato residue cost?

The cost of drying potato slag mainly includes raw materials, sites, labor, equipment and heat sources. The cost of raw materials, sites, labor, heat sources, etc., needs to be determined according to local consumption levels, and the cost of equipment is also very large. The proportion, and how much it costs to buy potato dregs dryer equipment depends on the actual production needs, because different production conditions are different, including the type and model of the equipment. If you want to know the specific situation, you can consult Zhengzhou Dingli Factory for free. Here you have a professional technical manager to design the production plan and select and quote for you according to your requirements.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Potato residue dryer solves the problem of environmental protection of potato residue

Potato dregs have a high nutritional content. Many merchants are hoping to make good use of this resource, but they don't know what to do. In fact, many customers choose to use a potato dregs dryer for drying, especially the new generation of potato that is now launched. The slag dryer is a quick solution to the problem of environmental protection of potato dregs.

The potato dregs dryer is designed for the needs of customers to dry the potato dregs. While meeting the customer's requirements for drying, it also designs equipment models with different output and moisture requirements. potato residue is rich in protein, the use of potato dregs dryer is to improve the drying efficiency while ensuring the nutrient content of the product. The equipment is a rotary tumble dryer, the potato dregs enters the potato dregs dryer, through direct contact with high temperature, the drying efficiency is high, and the equipment is an innovation of drying technology, low energy consumption, and solves the problem of energy consumption.

  The problem of potato residue treatment has been plagued by some enterprises. The timely use of Dingli potato residue dryer can not only solve the processing problems, but also create another road for the enterprise to get rich.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Tea residue dryer, multi-material universal price

The tea residue dryer has strong versatility and can be dried by various materials. For example, the materials such as stevia residue and herbal tea slag can be dried by one machine, so the price is affordable and the cost performance is high. The tea slag dryer also belongs to the three-layer rotary drying structure, and the plant area is occupied less, and the processing capacity is not limited.

After the tea slag is dried, it is mostly used in the fields of biomass fuel or green plant base, which has good economic benefits and its utilization rate is continuously improved. The tea slag dryer is also high-temperature dry. The over-wet tea slag can be dewatered by a screw extrusion dewatering machine, and then the high temperature and strong evaporation of the drum is carried out. Such a configuration and planning treatment is a lower cost.

Zhengzhou Dingli dryer manufacturers custom production, daily drying capacity from a few tons per day to more than 100 tons of capacity equipment does not set production limits, small drying projects or large tea residue drying production line, environmentally friendly low consumption, with many The project case is proof of the strength of the company, rational planning, fine processing, free installation, so the construction of the entire production line is more efficient, time-saving and labor-saving.


If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Is the coconut silk dryer high in productivity?

The moisture content of the coconut silk dryer after drying is about 12%. It is a professional dryer designed and manufactured for the characteristics of coconut silk, palm silk and other materials. The equipment has the characteristics of large output, strong drying and precipitation ability, high efficiency and energy saving, convenient operation, guaranteed product quality, safety and hygiene, small floor space, etc., which can save 30-50% energy compared with ordinary dryer, which can maximize the saving energy and drying costs.

 The output of the coconut silk dryer is about 1-7 tons per hour, and the high-humidity coconut fiber can be quickly dried to a finished product with a moisture content of less than 18%.

  Zhengzhou Dingli provides you with coconut fiber and coir dryer equipment of various sizes, factory direct quotation discount, lifetime after-sales guarantee, you can consult online, you can also visit the factory at any time.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Small bean dreg dryer manufacturer's technical system mature

The quality of a high-quality bean dregs dryer production line is not the price, but a complete technical system. Each link can be connected efficiently. The bean dregs dry material has a long storage time, no paste, no saccharification, and is used not only for feed additives. Reduce costs, but at the same time ensure the nutritional balance of feed.

Soybean residue drying has different requirements and differences compared to distiller's grains, bran, corn husk, tea slag or straw forage. First of all, the bean dregs are easier to bond and paste in the high-humidity state, so the drying technology is processed. It can not be used with the slag feed or straw forage feed, but it is more necessary to adopt the stirring and drying structure of the field, continue to break up, and evenly raise the material. At the same time, it will enter the airflow low-temperature drying process after drying to 35% water. The conditions and elements that a mature technology system must possess.

The technical system mature bean dreg dryer manufacturers are not only the same, but also different treatments in other dregs feed drying technology, tailor-made, such as straw forage grass is used for low temperature drying, while distiller's grains feed is high temperature and dry. Therefore, whether it is a large or a small bean dregs dryer production line, it is necessary to select a technically competent manufacturer to obtain reliable and reliable hardware support.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Treatment of the lifting plate in the technical structure of peat dryer

The peat dryer configured in the hot blast stove usually uses the heated air and the wet peat to directly dry, and the heating is sufficient, the drying efficiency and the drying quality are all directly related to the lifting plate, so the mud The structural treatment of the nutrient plate in the design of coal drying technology is very important.

So what are the effects of the lifting plate on peat drying?
The structure of the lifting plate is unreasonable, and it is easy to form a wind tunnel, resulting in low heat utilization rate, high fuel consumption and reduced drying capacity. Unreasonable design will reduce the contact area between wet peat and hot air, and contact time. In order to reduce the quality of peat drying, it is easy to cause uneven and drying peat etc. Therefore, peat dryer manufacturers are also necessary to upgrade the structure.

Zhengzhou Dingli peat dryer manufacturer is committed to coal drying and upgrading for more than ten years. It has mature technical system, fine processing technology, high-quality technology and production team, perfect after-sales system to ensure a high efficiency and environmental protection for customers. The energy-saving and high-quality peat drying production line, therefore, completely avoids the above problems in the design of the lifting plate. Therefore, it is recommended that customers pay attention to the technical structure when they visit the factory.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

What should be paid attention to when buying a pasture dryer?

 In recent years, pasture dryers have been favored by the market, and the demand for equipment has increased year by year. For a time, investment in pasture drying equipment has become a wise choice for enterprises. There are so many manufacturers on the market today, how to identify reliable drying equipment?

 1. Production process

  The pasture dryer is mainly reflected in the production process whether the production line is reasonable and the process is mature. This is the guarantee for the stable operation of the equipment in the later stage. The quality of the production process is very important when selecting equipment.

  2. Product quality

  The quality of pasture drying equipment on the market is not uniform. On the whole, the quality of the big brand manufacturers is better, the overall work efficiency of the equipment is high, the failure rate is low, saving time and effort, and saving a lot human and material resources in the later operation.

  3. Equipment performance

  Regular manufacturers have professional equipment manufacturing licenses. Before delivery, they will test the equipment according to national standards. If the technical indicators of the equipment are qualified, whether they can meet the requirements of customers and the market, they will enter the market after they meet the requirements.

  4. The strength of the factory

  The stronger the strength of the manufacturer, the more reliable the equipment will be in terms of technology, performance, manufacturing process and after-sales service. Strong manufacturers often have many years of manufacturing experience and technical team, capable of technical implementation and new research and development, there are many equipment models to choose from, and related supporting facilities are also relatively complete.

  When selecting equipment, be sure to strictly follow the above 4 points to select and purchase the equipment.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Where is the coal slime dryer manufacturer in Zhengzhou? Henan slime dryer equipment manufacturer

Where are the coal slime dryer manufacturers in Zhengzhou? Henan slime dryer manufacturer - Zhengzhou Dingli is located at No. 12, Hongye Road, High-tech Development Zone, Zhengzhou City, Henan Province. It provides a variety of types of slime drying equipment to meet the needs of customers in various regions. Directly provide price advantage, can be exported to foreign countries, welcome customers to purchase.

Dingli coal slime dryer manufacturer-Dingli Company has carried out repeated technological innovations and practices in response to the current market conditions of the slime industry and the characteristics of local slime, and has carefully created a new generation of slime drying system. Drying and utilizing slime, Dingli slime dryer is stable in operation, convenient in operation and maintenance, and more affordable. What is the working process of Zhengzhou Dingli slime dryer? Dingli coal slime dryer is mainly composed of heat source, feeding device, belt feeding machine, rotary drum, belt discharge machine, induced draft fan, dust collector and power distribution cabinet. The working principle of the set of equipment is as follows: Since the material has certain viscosity, the wet material enters the drying drum and is divided into the following working areas: First, the guiding material area, the wet material mud enters this area and contacts with the high temperature hot air to quickly evaporate water, and the material is large. When the guide plate of the lead angle is copied, the shape is not bonded and then introduced into the next working area; the second is to pick up the cleaning area, the wet material is copied by the plate in this area to form a curtain state, and the material is easy to form when the material falls. In the area of ​​the drum wall, in this area, because the equipment is designed with a cleaning device, the cleaning device cleans the material adhering to the inner wall very reasonably. In this process, the cleaning device also breaks up the agglomeration of the material ball, thereby increasing the The heat exchange area increases the drying rate; the third is the inclined lifting plate area. The wet coal slurry has a low moisture loose state in this area, and the material has no bonding phenomenon in this area. After sufficient heat exchange, the material meets the requirements. The water state enters the discharge area; the fourth is the discharge area, the drum does not have a copy board in this area, and the material slides in this area to the discharge opening to complete the entire drying process.


If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Drying method for pasture dryer

There are many ways to dry the pasture. The natural drying method, the artificial drying method (grass dryer) and the physicochemical drying method are often seen. Today we are talking about the manual drying method using the pasture dryer. What is the specific?

 Several methods of artificial drying:
  1. Drying of the air: using a fan, a blower to carry out the method of not heating and drying the haystack or grasshopper. The room temperature blast drying is suitable for the day and night relative humidity of the forage harvesting period below 75% and the temperature is higher than use at 15 °C. The air used for blowing in particularly humid places can be heated appropriately to increase the speed of drying.

  2. High temperature rapid drying: the dryer will quickly evaporate the moisture of the grass, the grass with high water content in the dryer after a few minutes or a few seconds, the water will drop to 5% -10%. The preparation of hay has little effect on the nutritional value and digestibility of pasture. But the need for higher inputs, the cost of hay has increased dramatically.

  Therefore, the method of drying the forage must be decided according to the situation.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

Importance of sweet potato powder slag dewatering machine for powdered slag feed processing

The sweet potato powder residue dewatering machine is an indispensable equipment in the processing of sweet potato powder residue. Sweet potato powder residue processing has multiple processes, matching different equipment according to your production needs. But in general, the dewatering machine is used for powdered feed processing. So how important is the sweet potato powder slag dewatering machine for powder slag feed processing, let's take a look.

  Sweet potato powder slag dewatering machine is mainly used for pre-dewatering operation of sweet potato powder residue feed processing. It has simple structure and reliable work. It can dehydrate the sweet potato powder residue with water content of about 85% to 50-60%, which greatly reduces the dryer. Energy consumption, reducing the cost of powdered feed processing. It can be said that the sweet potato powder residue dewatering machine determines the work quality and operation efficiency of the whole powder residue feed production line.

Zhengzhou Dingli insists on providing you with high-quality equipment and services. In the course of more than 10 years of development, we have been striving for development on the ground, striving hard and working hard to provide you with better equipment and services. Our equipment can be installed and debugged for free for you, and there will be perfect after-sales protection in the later stage. For more information, you can call or leave a message, we will answer your service for free 24 hours a day.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com


my Whatsapp:15670626070

Guizhou sweet potato residue dryer project installation hot

Recently, Guizhou customers purchased hot potato dregs dryer equipment from Zhengzhou Dingli. The installation is a very important part of the operation of the dryer. Many users are also very concerned about this piece. Let’s take a look at Guizhou sweet potato. Sweet potato residue dryer installation site.

From the figure, we can see that the main body of the sweet potato slag dryer, the dewatering machine, and the dust collector have been installed. The installation of other supporting equipment is currently underway and will be putting into trial operation in the near future. The successful start-up of the sweet potato slag dryer will accelerate the pace of resource utilization of Guizhou sweet potato slag and make a great contribution to the local utilization of sweet potato slag.

At present, the dewatering and drying equipment for solid waste materials independently developed and produced by Zhengzhou Dingli has been successfully applied in nearly 1,000 projects in more than 30 countries including Vietnam, Laos, Indonesia, India, Malaysia, Italy and France. Users trust and love, interested friends can contact us directly, we have a professional technical engineer to introduce you in detail.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whatsapp:15670626070

How much is the bean dreg dehydrator--low noise, low consumption and more optional

A small bean dregs dehydrator can work continuously for 24 hours, reaching a daily processing capacity of tens of tons or 100 tons, and separating and dehydrating liquid bean dregs at a lower cost and manpower, and the price of a bean dreg dehydrator can be tens of thousands. In the hundreds of thousands, the use period is long, low noise and low consumption.

The bean dregs dewatering machine utilizes the action of external force to remove the external water of waste materials such as high-humid bean dregs, potato dregs and starch slag, and the dehydration capacity reaches about 55% of dry materials. The deeper dewatering requires high-speed drying of the paddle mixing drum. It is. The bean dregs dewatering machine is also the front matching machine of the drum drying equipment, which is used to reduce the drying fuel, improve the heating condition of the materials, ensure the dry and wet dry materials, and the quality is superior.

The bean dunk dehydrator is reasonable and reasonable.

Zhengzhou dewatering machine manufacturer Dingli new energy supply complete set of bean dreg dehydration and drying equipment, quality is guaranteed, manufacturers free installation and commissioning, large bearing capacity, material selection, fine processing, long service life, stable dehydration performance, in many bean dregs The application in the dehydration and drying production line of potato dregs and cassava residue is very good. A set of bean dregs dehydrator is affordable and cost-effective. Please consult for details.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whastapp:15670626070

How to deal with bagasse-the process of bagasse rotary dryer?

Sugarcane bagasse has certain utilization value according to the characteristics of the material. It can be used as feed or biomass fuel. In the process of bagasse treatment, dryer equipment is needed. At present, the bagasse drying method mainly uses rotary drum drying equipment. I will briefly introduce the process flow of the bagasse tumble dryer.

  Dehydration treatment according to the moisture of the bagasse, after the bagasse is dehydrated to a certain extent, after being added to the dryer, the material is evenly dispersed in the dryer and fully contacted with the hot air under the flipping of the uniform in the drum, which speeds up dry heat transfer and mass transfer. In the drying process, the material is discharged under the action of the inclined plate and the hot temper, and the star discharge valve is discharged to the other part of the dryer. The bagasse drying production line is mainly composed of heating source, feeding machine, feeder, rotary drum, discharge machine, induced draft fan, unloader and power distribution cabinet; Zhengzhou Dingli currently introduces a new process of bagasse drying machine equipment has large capacity, high drying efficiency, energy saving and environmental protection, high degree of automation can save certain manpower and material cost, and Zhengzhou Dingli provides follow-up technical support services to create high-quality bagasse drying projects for customers.

  Zhengzhou Dingli is a company that sells dewatering and drying equipment. It can provide dehydration and drying equipment of various specifications and models, suitable for a variety of materials. For the price and parameters of Zhengzhou Dingli dewatering and drying equipment, you can contact online customer service.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whastapp:15670626070

The ten rules for maintaining slime dryers

 As a large equipment to deal with slime, the maintenance of slime dryer has been concerned. In view of the problems existing in the market, the following contents are summarized for the use of slime dryer users for reference.

 1. The coal slurry is not completely dried at one time
  This is mainly caused by the dryer being too small or the dryer being used improperly. In addition, wind network wind pressure and flow calculation errors can also lead to such failures. The drying equipment can be replaced or re-modified, or the manufacturer is required to recalculate the wind pressure, flow and other changes. If it is caused by improper operation, the operator will operate correctly according to the instructions.

  2. Coal mud fire failure
  It may be a problem with the design of the dryer equipment, or the coal can not be sucked up and cause fire in the dryer. In addition, it may also be caused by human factors, such as forcing the drying of too small a dryer to achieve a drying effect. At this time, it is best to replace the dryer equipment, check whether the dryer is installed correctly, whether it leaks or increases the wind pressure. Use the dryer properly and carefully increase the temperature of the dryer to avoid causing fire.

  3. Repair and replace a small number of damaged parts, adjust the mechanism of the slime dryer to ensure that the slime dryer can be used until the next repair period.

  4. Keep the slime drying equipment clean, wipe the equipment daily, clean the fluff inside the dust box to ensure ventilation, etc. Regularly open the rear cover to clean the inside of the equipment.

  5. Check the gas source triple piece before starting the machine, drain the water and ensure sufficient oil level.

  6. Repair or replace major parts and more wear parts, check the entire mechanical system, and calibrate the foundation of the slime dryer to restore and meet specified accuracy, power and other technical requirements.

  7. Inspect and maintain the parts, such as lubricating the bearings, adjusting the pulleys, checking the electrical lines, the rocker arm of the door, the pipe joints, etc. and fixing them.
  8. Ensure that the fixing bolts of the machine base are not loose, the support springs are tightly connected, and the control of the computer board, the wind wheel and the heat exchanger have good flexibility.

  9. Ensure that the slime dryer equipment has good grounding, and the temperature gauge on the equipment should be verified by metrology.

  10. Repair or replace the main parts and all wear parts, so that the technical condition and technical performance of the slime dryer reach the specified standards. The length of the cycle depends on the quality of the maintenance and maintenance of the slime dryer.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whastapp:15670626070

Which kind of dewatering machine is used for the treatment of waste leaves

A large number of waste leaves are produced every day in the vegetable farm or vegetable growing base, and these waste leaves can be recycled and used for the production of vegetable feed or fertilizer, but the leaves with high water content are highly perishable, and the utilization of waste leaves is utilized. A dewatering machine is required for extrusion dewatering.

Which kind of dewatering machine is used for the treatment of waste leaves

The waste leaf dewatering machine is recommended to use a screw extrusion dewatering machine, which is cost-effective and has a long practical period. The high-humidity materials are common and the power consumption is small. Therefore, the dewatering of the leaves is usually equipped with a screw extruder, which is divided into single-axis dewatering and Double shaft dewatering, the model has regularity and lengthening and widening.

When you buy equipment, you are more concerned about the quality, price, and after-sales.

The factors affecting the quality of the waste leaf dewatering machine are: the material of the raw material, the processing technology, especially the material of the wearing parts, whether the motor is a genuine national standard product, which are related to the life of the machine;

Regarding the price of equipment, each product and each manufacturer are different. It is necessary to select the same product than the quality and price, and choose a cost-effective equipment.

After-sales service is a very important one, which is the guarantee for your normal operation in the future.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

my E-mail:dingliwyt@gmail.com

my Whastapp:15670626070

How much is the hourly output of sawdust dryer?

 Dingli Biomass Dryer is suitable for a variety of materials: wood chips, sawdust, hibiscus, shavings, bamboo chips and other materials. Currently used in many projects at home and abroad, what is the hourly output of Dingli sawdust dryer?

Zhengzhou Dingli has many years of experience in wood chip drying project, can provide users with high quality wood chip dryer equipment, equipment installation and commissioning, technical support and other services. Regarding the output of wood chip dryer, Zhengzhou Dingli is currently launching an hour of treatment 1~ 10 tons of equipment, in order to meet the needs of more customers dry materials, Zhengzhou Dingli not only provides the above capacity equipment, but also provides equipment design, customization and other services to meet more processing needs, to solve the material moisture demand of different customers at home and abroad. At the same time, in combination with environmental protection and other issues, the heat source can be used in a variety of ways, such as the selection of excellent biomass fuels, etc. Zhengzhou Dingli has launched a variety of specifications and models, only a part of the website is displayed. For more information about equipment parameters, you can consult online customer service.

  Zhengzhou Dingli not only provides wood chip sawdust dryer equipment, but also provides biomass drying and granulating complete equipment. The production line equipment has the advantages of large output, high efficiency, energy saving and low cost. Welcome everyone to negotiate cooperation with the project.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/ 

my E-mail:dingliwyt@gmail.com

my Whastapp:15670626070