Drum type corn stalk dryer price-corn stalk dryer drying video

Straight incineration of straw will cause environmental pollution, and it is one of the causes of smog. Therefore, it is now strictly prohibited to directly incinerate straw. Therefore, the reuse of straw has been paid attention to by everyone. The area of ​​corn planted is about several hundred million in China, so it will be A large amount of corn stalks need to be treated, and the corn stalks can be pulverized, dried and reused. Currently, it can be used in many projects and can be used for waste reduction and resource treatment. The corn stalk drying equipment is commonly used for drum corn stove drying. Machine, Dingli share is the corn straw dryer drying video for everyone, as well as a simple introduction to the price of the drum type corn dryer.

The corn stalk is pulverized by the pulverizing equipment, and the treated corn stalk enters the corn stalk tumble dryer through the feeding device, and the straw is continuously picked up and scattered under the inner layer of the slab to realize heat exchange; Then move to the other end of the inner layer to enter the middle layer, perform counter-current drying, and continuously move forward in the middle layer, and proceed in a two-step, one-step way of traveling; then, in the middle layer, the heat radiated by the inner layer roller can be fully absorbed, It also absorbs the heat of the middle roller and at the same time prolongs the drying time, where the material reaches a dry state. The material goes to the other end of the middle layer and falls into the outer layer, and travels in a rectangular multi-loop manner in the outer drum. The material that achieves the drying effect quickly travels out of the drum under the action of hot air, and the wet material that does not reach the drying effect cannot travel fast due to its own weight. Drying is sufficiently carried out in this rectangular copying board, thereby completing the entire drying process.

Corn dryer plays a very important role in the process of treating straw. The corn straw resources can be purchased by the corresponding dryer equipment. What is the price of the drum type corn stover dryer? Different equipment prices of different manufacturers, Zhengzhou Dingli can provide a variety of straw dryer equipment for the majority of users.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

Aplication of potato dregs dryer

  Potato residue dryer is the necessary equipment to extend the storage period of potato residue with water content up to 80%. The general potato residue dehydrator can only remove to 60%, which cannot reach the feed processing standard. Meanwhile, potato residue with water content of 60% cannot be stored and transported for a long time.The sweet potato slag dryer is dried at a high temperature, and the high-humidity potato slag enters the tumble dryer through the feeder, and a uniform thickness of the curtain is formed in the nutrient system to fully contact the heated air for heat exchange, and the water is heated and evaporated in three steps. Repeated heat evaporation in the rotary drying structure to achieve the expected drying standard when the material runs to the outlet, repeated heat evaporation in a three-way rotary drying structure to achieve the desired drying standard when the material is run to the outlet.

  Zhengzhou Dingli has produced high-humidity material drying equipment for more than ten years. The potato dregs dryer is a device developed by Zhengzhou Dingli for drying materials with high starch content and high-humidity materials. Materials similar to high-moist potato dregs are suitable. Dingli potato residue dryer has high material passing rate, no sticking to the wall, dry and wet dry material, color and taste. The company undertakes many potato slag dryer projects at home and abroad. From technical design to equipment production to installation and commissioning, the company ensures that customers can build high-quality potato residue drying production line with lower investment.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/ 

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

Where is the cassava slag dryer? How much is cassava slag drying equipment?

Where is the cassava slag dryer sold? Zhengzhou Dingli cassava slag dryer manufacturers directly sell, domestic and foreign customers can purchase, equipment support custom to meet different regions, no material needs, purchase cassava slag drying equipment, the price problem is a lot of customer concern, cassava slag set drying How much is the equipment? In fact, there are many factors affecting the price of drying equipment.

The cassava slag complete drying production line has cassava slag dewatering equipment, heat source equipment, feeding, discharging equipment, electric control equipment, drying equipment, dust removal equipment, packing equipment, etc. The configuration of each link in the production line will cause the overall cost. Differences, as well as the material price fluctuations of the equipment will also affect the equipment quotation. Some customers have higher requirements on the material of the equipment. The choice of using stainless steel materials will also increase the overall cost. The amount of cassava residue is an element that affects the selection of equipment specifications. One, therefore, the price of the complete production line of cassava slag with different production capacity will be very different. Therefore, the manufacturer's complete set of cassava slag drying production line is not a unified quotation. According to the specific needs of different customers, the equipment quotation is also different. After this needs to communicate with the sales personnel of the manufacturer in detail, the manufacturer can give a precise quotation according to the customer's needs.

Zhengzhou Dingli is a manufacturer of cassava dewatering and drying equipment. It provides turnkey projects for equipment R&D, design, production, installation, commissioning and after-sales. It can provide cassava slag drying production plan and equipment according to customer's production needs. Welcome everyone to negotiate with us.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

How much is the chaff biomass pellet fuel equipment?

China's annual production of chaff has ranked first in the world in 1997. and the production of material fuel by the re-processing of chaff is in line with China's energy structure transformation, and also in line with China's environmental protection and abandonment principles. Therefore, Chaff Biomass Pellet Fuel Equipmenthas the dual conditions of demanding market and technical equipment.

The crust biomass fuel equipment is also suitable for the production and processing of other waste wood scraps such as sawdust, wood chips and bamboo chips. Many biomass fuel production lines use a mixture of wood chips and chaff. The complete set of chaff biomass fuel production equipment includes a pulverizing unit, a drying unit, a power distribution unit, a granulating unit, a dust removing unit and a packaging unit, and the specific equipment configuration needs to be determined according to the needs of the customer.

The crust biomass fuel equipment has strong adaptability and intelligent control, the floor space is reduced by 50%, the heat utilization rate is high, the forming rate is over 98%, and the finished product ash is less than 1%. Therefore, the market of chaff biomass fuel strong competitiveness and price increase.

The chaff biomass fuel production equipment is a product launched by our company for the optimization of the energy market structure. At present,it is more popular in foreign markets, with good sales and reputation. With the continuous optimization of China's coal economy and the application of clean energy. With continuous expansion, biomass energy will have better development in industry and life. Therefore, the recycling rate of biomass fuel materials such as chaff, wood chips, sawdust, bamboo chips and dregs is increasing.

How much is a set of chaff biomass fuel production equipment? Zhengzhou Dingli adopts customized production. The customer proposes specific daily production requirements, the company's technical accounting equipment model, and provides customers with reasonable technical solutions for the entire production line equipment, and targeted quotations, details can be consulted.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

How to deal with the potato residue from the starch factory?

Generally, the moisture content of potato residue from the starch factory is more than 60%, which is difficult to transport or store, and also makes it difficult for the outsourcing operation of the starch factory.The potato dregs with larger water content are treated with professional machinery and equipment, that is, potato dregs dehydrator and drum dryer.

 The potato dewatering is recommended to use a belt dewatering machine, which has good dewatering effect and high solid material recovery rate.The belt dewatering machine is a new type of dewatering equipment produced by our company for the actual situation of potato slag. After years of research and development, it has successfully absorbed the advanced technology of domestic and foreign filter presses. It is especially suitable for the dewatering of potato residue, with continuous production and power consumption. Low, low noise, convenient operation and maintenance, etc., its dewatering effect is at the leading level.

  The water content of potato slag extruded by dewatering machine is still about 50%. For non-fermentation treatment, potato slag still needs deep dehydration to achieve long-term preservation and high-quality reprocessing. For deep dewatering, the potato dregs rotary drum dryer is more suitable, which has the advantages of small floor space, large processing capacity, high strength drying, low running cost and simple operation.

  Zhengzhou Dingli is a professional manufacturer of dewatering machine and tumble dryer. It can provide customers with information such as dewatering and drying process of potato dregs, equipment configuration, quotation and equipment running cost according to customers' dry water content and daily processing requirements, promote customers' comprehensive understanding of potato residue treatment.


Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

Dingli Potato Residue Drying Plant For Sale

Starchy residue is the by-products which produced when the potato, sweet potatoes, cassava and other agricultural products produce starch production, the moisture is about 80%, as for high moisture content, heavy viscosity, with the traditional drying process equipment, drying temperature is high, slag starch Gelatinization chemical reaction, dextrin clogging material particles pores, water evaporation does not come out, the particles surface turned yellowish black, "outside the coke within the soft", a serious impact on the sale of dry residue; drying temperature is low, the moisture cannot drying below 15 % at all, dryer sticky wall, gelatinization, agglomeration, drying equipment can not do normal production,this will lead to the impaired interest of the customers.Dingli brand starch slag dryer is based on the research and development for characteristics of raw material such as cassava, potato slag, and after a few sets of dryer producing experience, which can drying all kinds of potato residue below 12% in one time. The equipment used by the company's "mechanical dehydration + drum drying + pulse air drying " special Chinese patent technology, an effective solution to the traditional dryer which can not dry cassava, potato residue problems, drying material with perfect color, good quality, production line of energy saving and environmental protection ,with safe and stable operation,which praised by many new and old customers.

Material flow : 75-85% moisture content material first with special dehydration machine removing a part of moisture, the moisture removed around 68%, then send into the dryer by screw conveyor to realize downstream drying. Under the effect of inner shoveling plate, materials are took and scattered constantly, and move in spiral forward method. Inside mixing blade device will be fully stirred and crushed material, material and hot air through full heat exchange, the rapid evaporation of water vaporization, reaching about 35%, discharged by the screw conveyor, then send into the semi-wet material crusher, crushed material size below 1mm, then into pulse air drying process, within 3-10s the material quickly removed to 14% by the cyclone discharger and Pulse bag dust collector recovery dry powder, exhaust emissions amount to the national standard requirement, to complete the entire drying process. Drum cleaning device is installed inside the drum to prevent the material from adhering to the cylinder wall.

Air Flow: The air through hot blast stove fan inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850℃, then it is inhaled by the dryer induced draft fan absorted to dry material and evaporate water. Through the heat exchange  drying the material. When temperature decreases to 55-85℃, it is discharged out of the dryer. Wet dust are discharged on standard through the cyclone and the pulse dust collector purifying and emission.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/ 

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070

Dingli sauce residue dryer Hunan project departure

On July 9th, Hunan sauce residue dryer was processed and loaded and shipped. The daily processing capacity of the equipment was 25 tons per hour, and dry material water requirement was 12%. At present, the vehicle has been on the way and will arrive on time.

Sauce residue dryer is a series of feed drying equipments of our company. It can be used for drying and upgrading of waste slag, vinegar residue and bran etc. High temperature and strong drying, high heat utilization rate, low energy consumption, and many customers. Recognition and praise. Hunan Sauce Residue Dryer will also be a high-efficiency, low-consumption and environmentally-friendly desiccant dewatering and drying production line.

In Hunan, our company has a variety of high-humidity waste residue dewatering and drying projects, from sauce residue to dregs and other waste residue materials. There are many cases, customers can visit nearby, and understand the operation process and project quality of dehydration drying equipment. This is also the main reason why Hunan Sauce Residue Dryer customers have determined our company as a project equipment supplier.

Hunan Sauce Residue Dryer will be installed and commissioned according to customer's time requirements. The company will continue to report on the progress of the project. Dingli would like to know about various high-humidity waste drying equipment such as sauce residue, brewers grain, bran and rapeseed. Welcome to Dingli inquiry and order equipment.

Welcome to Dingli company consult; Dingli company of  E-mail: dingliwyt@gmail.com; Dingli company of website: http://www.feeddryer.com/ 

my e-mail:dingliwyt@gmail.com

my whastapp:15670626070