Sawdust dryer

Saturday, May 9, 2020


Which kind of okara dehydrator has good effect

Which kind of okara dehydration machine has good effect? There are many types of dehydration equipment. Mechanical extrusion dehydration. The one that saves money and has a large processing capacity is a belt dehydration machine. It is divided into hydraulic extrusion dehydration and pair-roller press dehydration. Production, unlimited models, affordable, strong dehydration capacity.
Which kind of okara dehydrator has good effect


The so-called good effect is on the one hand strong dehydration ability, on the other hand is low power consumption and simple operation; and these two requirements, the belt dehydrator meets the requirements, in bean dregs, bean curd dregs, sweet potato dregs, tapioca dregs and potato dregs It is widely used in the dehydration and drying production line. The technical parameters such as the power, corresponding model and floor area of the belt dehydrator can be found in our technical parameter table.

You can refer to the production video for the effect of the okara dehydrator. Our okara dehydration video was taken at the project site and is truly available for inspection. The dehydrator has a high solids recovery rate and low power consumption. It has been fully tested and approved by the market and customized Production, fair prices and high cost performance.

Video of belt press dehydration production of okara dehydration machine

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070

Friday, May 8, 2020

How to dry corn silage?

 Silage refers to cutting fresh silage into short-sealed silage facilities, brewing microorganisms into a nutritious succulent feed with a special aromatic smell. At present, the silage modulation technology has been greatly improved compared with the past. In the silage method, the low-moisture silage is promoted, and special silage methods such as additives, molasses, and cereals are added to improve the silage effect and improve the quality of the silage. The silage equipment is developed to a large-scale enclosed silage dryer, and the loading and reclaiming have been mechanized.

  There are four common methods for drying silage

  1. Small pile drying

  The previous folk drying was done in the field, and the silage was exposed to the sun. After the forage is harvested, it will be exposed to the sun on the dry ground in the same place or on a nearby site, and it will be retreaded every few hours. When the moisture is reduced to about 50%, it can be stacked into a small pile of 1 meter, so that the grass is dried in the small pile. When the weather is fine, the silage is spread out and stacked in the evening. When the weather is bad, the grass should be covered with plastic cloth to prevent the rain from flooding. When the weather is sunny, it will be re-tapped until it is dry.

  2. Grass frame drying

  When the grass is dried in the field for half a day or a day, and the moisture drops to 45-50%, place the grass on the shelf. Because the air gap in the middle of the wooden grass frame can circulate air, it is conducive to the loss of forage water, improves the drying speed of forage and reduces the loss of various nutrients.

  3. Brewing and drying method

This method is a special drying method between the preparation of green hay and silage. This drying method has a greater loss of nutrients for pasture. This aspect is more suitable for rainy days.

4. Equipment drying

  Silage generally has a large output, and is usually dried and stored by a silage dryer. The silage dryer is a drum type structure, which has a fast drying speed and a good drying effect. It can achieve large-scale continuous drying. This equipment can also be used for drying alfalfa, elephant grass, straw, and other pastures. It has a wide range of use and is a universal forage drying equipment.

  The silage dryer is composed of a drying cylinder, a heat source, a conveyor belt for incoming and outgoing materials, an electric control cabinet, a transmission device, an induced draft fan, and a baler. Zhengzhou Dingli can be customized according to customers' output requirements. If you are interested, please contact us.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070

Biological feed dryer configuration

Dingli feed dryer equipment is suitable for drying soybean meal, bran and other fermented biological feed. At present, there are many equipment specifications and models. What is the specific configuration of Dingli biological feed dryer?

The configuration of Dingli feed drying production line is mainly composed of heat source, feeder, rotary drum, discharge machine, induced draft fan, unloader and power distribution cabinet; after the dehydrated wet material is added to the dryer, it is evenly distributed in the drum under the turning of the plate reader, the materials are evenly dispersed in the dryer and fully contact with the hot air, which accelerates the heat and mass transfer of drying. During the drying process, the materials are discharged to the star-shaped discharge valve in the other section of the dryer under the effect of the inclined copy board and the hot temperament.

  At present, Zhengzhou Dingli technical staff has launched various configurations according to customer needs. The production line can be equipped with a variety of heat sources and dust removal equipment. For specific configuration parameters, you can consult online or leave a message.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070


How much is a beer lees dryer/lees drying video and model

  Brewer's grain drying feed must be dehydrated and dried for easy storage and transportation, extending the shelf life. A beer grain dryer is necessary, the price is not expensive, the technology is mature, durable and high yield, environmental protection and low consumption, Dingli 10 years wine grain feed drying equipment The manufacturer customizes a full set of equipment, how much is a beer grain dryer, and the video and model of lees drying are detailed in this article.


  How much is a brewer's grain dryer? A hundred thousand or hundreds of thousands can't determine whether the brewer's grain drying has good nutrition and taste. The quality and price of processed beer grain feed is higher. The key is the performance of the dryer and technology. The level is high. A high-quality beer lees drying equipment has a large processing capacity, which can dry more than 1 ton of high-wet lees per hour. The drying process is clean and environmentally friendly. At present, steam drying lees equipment, gas, biomass fuel and other hot air furnaces are used for heating and drying Dry beer distiller equipment, etc. have greatly improved the high pollution problem of coal-fired dryers, and the quality of dried lees is higher.

  How much is a beer grain dryer
 
    The price of beer lees drying equipment model depends on the configuration standard, the type of heat source, the price positioning of the manufacturer, various influencing factors and various quotation levels. Zhengzhou Jiutian Beer Grain Drying Equipment Manufacturer has devoted more than 10 years to the development and supply of technology and equipment for various slag feed dehydration drying and granulation production lines. It has many feed drying sites, and the beer grain dryer is our flagship product. , Set a variety of technical advantages in one, affordable price.

  How much is a beer grain dryer, what model, 24 hours online consultation, customized production and preferential quotation.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070


Thursday, May 7, 2020

How to quickly dry beer lees? Drying process of beer lees dryer

  Beer lees are produced during beer processing and can be used as feed ingredients. How does the beer lees dryer dry the lees? Today I will briefly introduce to you.

  The beer lees enter the inner layer of the rotary drum from the feeding device to achieve co-current drying. The material moves to the other end of the inner layer and enters the middle layer for counter-current drying. The beer lees are repeatedly raised in the middle layer in two steps one step back travel mode, the beer lees travels to the other end of the middle layer and falls into the outer layer. The beer lees travels in a rectangular multi-loop way inside the outer drum. Due to its own weight, the wet material cannot travel quickly. The beer grains are fully dried in this rectangular copy board, thus completing the purpose of drying.

  Beer lees can be dried through the above process. Dingli beer lees dryer is currently used in many projects. Dingli lees dryer supports customization, there are many specifications. If you are interested, please consult us.


If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070

How to quickly dry beer lees? Drying process of beer lees dryer

  Beer lees are produced during beer processing and can be used as feed ingredients. How does the beer lees dryer dry the lees? Today I will briefly introduce to you.

The beer lees enter the inner layer of the rotary drum from the feeding device to achieve co-current drying. The material moves to the other end of the inner layer and enters the middle layer for counter-current drying. The beer lees are repeatedly raised in the middle layer in two steps one step back travel mode, the beer lees travels to the other end of the middle layer and falls into the outer layer. The beer lees travels in a rectangular multi-loop way inside the outer drum. Due to its own weight, the wet material cannot travel quickly. The beer grains are fully dried in this rectangular copy board, thus completing the purpose of drying.

  Beer lees can be dried through the above process. Dingli beer lees dryer is currently used in many projects. Dingli lees dryer supports customization, there are many specifications. If you are interested, please consult us.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070
Brewer's spent grains requirements for drying technology

Many different industries such as distiller's grains, bean dregs and medicinal dregs are constantly developing, and the scale is getting larger and larger. So far, many materials can be basically dried and processed to finished products. To dry a large amount of materials, professional production enterprises must find the target. Buying the right equipment can save costs and improve efficiency, save time and effort. Looking for excellent dryer equipment manufacturers can go to Zhengzhou Dingli, and you can definitely buy the drying equipment you are satisfied with.


 The current technology of the lees dryer is based on the original tumble dryer principle and further innovation. The drum dryer we mentioned here is a traditional drying equipment. This drying equipment has large operating flexibility and processing capacity, stable and reliable operation, and strong applicability. It is suitable for metallurgy, building materials, chemicals, coal washing, fertilizer, ore, sand, clay, kaolin, sugar and other fields. Inside the tumble dryer, there are dispersing parts. Distillers' grains and other materials enter the body of the dryer. The copyboard on the drum wall is repeatedly picked up and dropped. In the process of falling, it is broken into pieces by the dispersing device and fully contacted with hot air to dry.

    If you are still confused about the drying technology of lees and other materials, you can contact online customer service or leave a message for consultation.

If you want to know price, Please leave your E-mail or Whatsapp

Dingli company of website: http://www.feeddryer.com/

My E-mail:dingliwyt@gmail.com

My Whatsapp/wechat/phone:+8615670626070